Installation day goes best when the crew can reach every opening easily. Here is a simple checklist.
A few days before
- Confirm the date and arrival window with your contractor.
- Check HOA or building rules for work hours and elevators.
- Arrange parking space for the crew and materials.
The day before
- Clear the area. Move furniture, plants and decor at least 3 to 4 feet from each window.
- Remove window treatments. Take down blinds, curtains and rods.
- Protect valuables. Remove art, mirrors and electronics from walls and nearby shelves.
- Secure pets. Keep them away from work areas, since doors will be open.
- Clear outside paths. Move patio furniture, grills and planters away from exterior walls.
On the day
- Be available for questions and access.
- Expect noise and some dust. A good crew uses protection and cleans up.
- Do a walkthrough at the end and check each window opens and locks.
After the installation
Keep the paperwork: warranty, product approvals and permit. Ask about the final inspection date. See maintenance tips and how long installation takes.
Inside the house: room by room
- Living room: pull furniture away from windows and sliding doors; roll up rugs near entries.
- Bedrooms: clear nightstands, lamps and wall decor near windows; remove bed canopies and curtains.
- Kitchen: clear counters and window sills; protect small appliances from dust.
- Bathrooms: remove items from window ledges and shelves.
Outside the house
- Trim bushes so the crew can reach the walls.
- Move cars so the crew can park and unload.
- Gate access: unlock gates and tell your community security about the work.
Protecting your belongings
Cover furniture you cannot move with sheets. Remove fragile items, art and electronics from nearby walls. Take pictures of your rooms before work begins in case you need to document anything.
Pets and kids
Doors will be open and tools will be out. Arrange a safe place for pets and keep children away from work areas.
Communicate with the crew
Tell the crew about any special concerns such as alarm sensors, delicate floors or windows that stick. Ask who your point of contact is and the expected finish time each day.
End-of-day walkthrough
- Check that every window opens, closes and locks.
- Look at the sealant and trim for gaps or smears.
- Ask about any touch-ups and final inspection timing.
Frequently Asked Questions
Do I need to be home during installation?
Someone should be available for access and decisions, but you do not need to watch the work.
Will the installation be messy?
Some dust and noise are normal. A good crew protects floors, works carefully and cleans up daily.
Do I need to remove blinds and curtains?
Yes, it helps. Take down blinds, curtains and wall items near windows.
Should I turn off my alarm sensors?
Tell your alarm company about the work. Window sensors usually need to be re-installed or tested after replacement.
Ready to talk about your project? Get a free written quote (usually within 48 hours) or call 786-343-4729. EZ Glazing Corp is licensed and insured (License #SCC131153391) and handles the permit and inspection.